Original XTOOL X100 PAD3 PRO Auto Key Programmer OBD2 Car Diagnostic Tool Active Test Immobilizer With Kc100 Free Update Online

In the ever-evolving world of automotive technology, having a reliable and versatile tool is crucial for workshops and technicians. The Xtool X100 PAD3 (also known as X100 PAD Elite) stands out as a professional car key programmer offering a range of advanced functions, from key programming to full system diagnostics.

Why Choose the Xtool X100 PAD3?

1. Comprehensive Key Programming Features

The Xtool X100 PAD3 provides professional key programming capabilities, making it an invaluable asset for automotive locksmiths and service providers. Here are some key programming features:

New Key Programming and PIN Code Reading

• New Key Programming: Easily program new keys for a wide variety of vehicles.
• PIN Code Reading: Access and read PIN codes with EEPROM for simple programming.

Advanced Functions

• Hexadecimal Editor: Utilize Win Hex for advanced editing capabilities.
• Immobilizer Programming: Program new immobilizers and reset ECMs as needed.
• Key and Remote Programming: Supports programming of both keys and remote controllers.

Special Functions Supported by Xtool X100 PAD3

The Xtool X100 PAD3 is not just a key programmer; it’s a vehicle diagnositc device that enhance vehicle diagnostics and maintenance. Here are some highlights:

Oil Reset Functions

• Oil Reset: Close the oil service light and reset service mileage & service intervals after replacing the engine oil.

Steering Angle Calibration

• Steering Angle Calibration: Clear memories of the previous steering angle sensor and store the replaced one, ensuring accurate steering alignment.

Electronic Parking Brake Reset

• Electronic Parking Brake Reset: Reset the new electronic parking brake to ensure safe braking functionality.

Battery Maintenance

• Battery Register & Battery Maintenance: Perform a reset on the vehicle battery to clear fault information and re-match the battery for optimal performance.

Advanced Brake System Functions

• ABS Bleeding: Achieve a firm brake pedal after exhausting air from the brake system.

Throttle Position Reset

• Electronic Throttle Position Reset & Learn: Initialize the throttle actuators to the default state for accurate throttle and idle engine operations.

DPF Regeneration

• Diesel Particulate Filter (DPF) Regeneration: Clear particulate matter from the DPF filter to stabilize its performance.

Tire Pressure Monitor System Reset

• Tire Pressure Monitor System Reset: Relearn TPMS sensors so that new sensors can be recognized by the ECU.

Additional Functions

• Tooth Learning: Complete tooth learning after changing the crankshaft, allowing the new part to function properly.
• Injector Matching: Write new injector numbers into the ECU for accurate communication and injection control.
• AF Adjustment: Optimize air-fuel mixture for better performance.
• AFS Reset (Adaptive Front Lighting System): Adjust the headlights automatically based on environmental light conditions.
• Air Suspension Reset: Supports vehicles from manufacturers like Audi, Mercedes Benz, BMW, Citroen, and more.
• Gearbox Reset: Compatible with various brands including BMW, Mercedes Benz, and Chrysler, ensuring proper gearbox functionality.

All Systems Diagnostic Functions

The Xtool X100 PAD3 works for all systems diagnostic functions, making it an all-encompassing tool for automotive professionals. It supports a wide range of systems, including but not limited to:

• Engine
• Auto Transmission
• Airbags
• Immobilizer
• Key Coding
• ABS
• Cruise Control
• Instruments
• Self-Leveling Suspension Systems
• Seats
• Doors
• Gateway
• Steering Angle
• Air Suspension
• Body Systems
• Electronic Power Steering & Motor Assisted Power Steering
• Tire Pressure Monitoring
• Rain Sensors
• 4WD System
• Stabilizer
• Intelligent Parking Assist
• Door Motors
• Audio Systems
• Air Conditioning
• Tiptronic
• Anti-Theft Systems
• Soft Top Mechanisms
• Headlamp Leveling
• Central Locking
• Automatic Clutch
• DPF Reset
• Electric Windows
• Plip Programming
• Heated Rear Window
• Xenon Headlights
• Wash Wipe Functionality
• Fuel Burning Heater
• Transfer Box
• Seat Memory Functions
• Oil Life Service Reset
• Sliding Doors
• Electronic Throttle
• Navigation System
• Rollover Sensor
• Multi-Function Steering Wheel
• Auxiliary Heating
• Electronic Parking Brake
• Clutch Electronics

This comprehensive coverage ensures that the Xtool X100 PAD3 is equipped to handle virtually any diagnostic requirement you may encounter.

Complete OBD2 Functions

The Xtool X100 PAD3 also offers a full suite of OBD2 functions that are essential for effective vehicle diagnostics. These functions include:

Reading Codes

• Show Detailed DTC Descriptions: Displays the detailed description of Diagnostic Trouble Codes (DTCs) to help diagnose issues effectively.

Erasing Codes & Reset

• Turn Off Check Engine Light (MIL): Clears codes and resets monitors, ensuring a fresh start for the vehicle’s diagnostic systems.

Data Stream

• Read Live ECU/PCM Data Stream: Reads and displays live data from the ECU/PCM, plotting functions graphically and storing freeze frame data for analysis.

I/M Readiness Status

• Emission System Status: Shows whether various emissions-related systems are operating properly and are ready for inspection and maintenance testing.

Read Live Data Stream

• Continuous Data Stream: Displays real-time data from the vehicle in a live graphic (waveform) format, allowing for immediate analysis.

View Freeze Frame Data

• Check Recorded Conditions: Provides information on specific vehicle conditions recorded by the on-board computer when an emission-related fault occurs.

O2 Sensor Test

• Retrieve O2 Sensor Monitor Test Results: Allows viewing of O2 sensor test results from the vehicle’s on-board computer for the most recently performed tests.

On-Board Monitor Test

• Emission-Related Component Tests: Retrieves and displays test results for emission-related powertrain components and systems, ensuring compliance with regulations.

Read Vehicle Information

• Display Vehicle Identification Information: Shows critical vehicle information such as VIN (Vehicle Identification Number), CID (Calibration ID), and CVN (Calibration Verification Number).

Component Test

• Actuate Vehicle Components: Certain vehicle components can be actuated by commands sent from the scanner to test their operability, ensuring everything is functioning as it should.

Key Features of Xtool KC100

1. Support for Volkswagen, Audi, and Skoda

The Xtool KC100 provides extensive support for key matching across multiple generations of Volkswagen, Audi, and Skoda vehicles:

• 4th and 5th Generation Key Matching: Compatible with 4th generation, 5th generation, and MQB key matching, simplifying the reprogramming process for automotive technicians.

• 96-Bit Online Key Matching: Supports online key matching for 4th generation 96-bit keys, ensuring quick and secure programming for various models.

• MQB Online Key Matching: Facilitates online matching for MQB platform vehicles, which includes a wide array of popular Audi and Volkswagen models.

2. Advanced BMW Key Matching

• CAS1-CAS3 Key Matching: The KC100 supports key matching for BMW CAS1 to CAS3 systems. This feature allows locksmiths to efficiently program keys for these older BMW models, ensuring reliable access for customers.

3. Land Rover Smart Key Functionality

• Post-2015 Smart Key Writing: The KC100 allows for the smart key write start function for Land Rover vehicles manufactured after 2015, streamlining the key programming process for luxury SUV maintenance and repair.

4. Key Programming for Fiat and Fischer Models

• Fiat Key Programming: The KC100 supports key programming for various Fiat models, including Fischer, Fiat 500, and Palio, providing versatility for technicians working across different brands.

5. Comprehensive Toyota and Lexus Support

• All Lost and Disassembly-Free Key Programming: The KC100 is capable of generating keys for Toyota and Lexus models without disassembly, supporting key generation for simulation keys including:
  • 94 Series
  • 98 Series
  • 88 Series
  • A8 Series
  • A9 Series
  • 39 Series

BI-DIRECTIONAL CONTROL (Active Tests)

The Xtool X100 PAD3 also features active testing capabilities, allowing users to send commands to various vehicle parts. This enables technicians to control and diagnose systems such as fuel pumps, fuel injectors, windows, doors, and sunroofs, ensuring they function accurately.

Key Features of Xtool X100 PAD3

The exceptional qualities that make the Xtool X100 PAD3 a must-have include:

All-In-One Diagnostic Capability

1. Full System Diagnostics: Perform full system diagnostics with real-time data access.
2. Support for Over 10,000+ Car Models: Versatile compatibility for various vehicle makes and models.

Technical Support and Updates

• 2 Years Free Online Updates: Keep your device updated with the latest software.
• Professional Technical Support: Access dedicated support for any questions or troubleshooting.

Conclusion

The Xtool X100 PAD3 (X100 PAD Elite) is not just a key programmer; it is a complete solution for professional car diagnostics and maintenance, making it an ideal scan tool for workshops and technicians who demand accuracy and reliability in their work. With its extensive features, robust performance, and unparalleled support, the Xtool X100 PAD3 is an investment that will enhance your automotive service capabilities.